manualshive.com logo in svg

Toshiba Adjustable Speed Drive H7 Series, Operation Manuals

The Toshiba Adjustable Speed Drive H7 Series is a powerful and innovative product designed for various industrial applications. With its advanced technology, this drive offers exceptional performance and control. To ensure seamless operation, we provide free downloadable operation manuals on manualshive.com. Access your manual today and maximize the capabilities of your Toshiba Adjustable Speed Drive H7 Series.

Share
Download
background image

210

Appendix G

H7 ASD Operation Manual

Appendix G

H7 Optional Devices

The ASD may be equipped with several options which are used to expand the functionality of the ASD. 

Table 18

 lists the available options and their functions.

Table 18. 

H7 Optional devices and functions.

Item

Device Function

ASD7-SIM2

Emulates the input control signals of the H7 ASD via switches and pots.

ASD-BPC

Provides dust protection for the H7 ASD when the EOI is removed or mounted remotely.

ASD-CAB-PC

Female 9-pin d-type to RJ-45 (PC to ASD cable).

ASD-EOI-N4

A replacement NEMA-4 EOI (without Rotary Encoder)

ASD-ISO-1

Provides isolation of the Control Board output circuit from the AM/FM output and from the II 
input.

ASD-MTG-KIT

EOI Remote Mounting Kit. See the section titled 

EOI Remote Mounting on pg. 200

 for further 

information on this option.

ASD-RTC

The Real Time Clock provides the user with a time stamp of the Start, Run, and Fault events.

ASD-SS

This option board is used to provide a hardware-based speed search function.

Note:

The ASD-SS is a factory-authorized service center-installed 
option for all 1 – 5 HP ASDs, 10 – 25 HP 230 volt ASDs, and 15 
– 40 HP 460 volt ASDs (see 

F314

).

ASD-TB1-AC1

Provides 120 VAC discrete terminal activation and additional I/O terminals.

Conduit Extender 
Box (option)

Provides more working space for conduit installation than the standard conduit plate.

HS35 Encoder

Provides rotational speed and/or directional information. The Encoder is mounted on the motor 
shaft or the shaft-driven equipment.

ASD – Multicom Option Boards

Note:

Multicom boards are identified as ASD-Multicom-A, -B, -F, etc.

-A

Incorporates the Modbus, Profibus, or Device Net communications protocol for system control 
and is able to receive and process Vector Control feedback.

-B

Provides a line driver and open collector interface for system control.

-F

The Tosline-F10 interface provides high-speed communication to Toshiba control equipment via 
twisted pair wiring.

-J

Able to receive and process vector control feedback via line driver or open collector interface.

-S

The Tosline-S20 interface provides high-speed communication to Toshiba control equipment via 
fiber optics.

-X

Provides extended terminal I/O functions for monitoring, feedback, and control.

Note:

See the user manual of the applicable option for further information on each item.

www 

. ElectricalPartManuals 

. com

Summary of Contents for Adjustable Speed Drive H7 Series







































































































































































































































Reviews:

No comments

Related manuals for Adjustable Speed Drive H7 Series

Lawler 570 Installation Manual preview
570
Brand: Lawler Pages: 2
Panasonic FP7 Series Additional Functions Manual preview
FP7 Series
Brand: Panasonic Pages: 45
EasyIO FG Series User Manual preview
FG Series
Brand: EasyIO Pages: 12
RMG GSM 3ST User Manual preview
GSM 3ST
Brand: RMG Pages: 6
FAAC E124 Manual preview
E124
Brand: FAAC Pages: 32
IDS X64 Manual preview
X64
Brand: IDS Pages: 2
Paradox PCS300 Reference And Installation Manual preview
PCS300
Brand: Paradox Pages: 32
Zener SMARTSTART 6000 Networking Manual preview
SMARTSTART 6000
Brand: Zener Pages: 36
Zapi SMART CONSOLE Instructions preview
SMART CONSOLE
Brand: Zapi Pages: 5
Samson 3756 Mounting And Operating Instructions preview
3756
Brand: Samson Pages: 56
EasyIO FG-20 Installation Manual preview
FG-20
Brand: EasyIO Pages: 17
V2 STARK6 Quick Start Manual preview
STARK6
Brand: V2 Pages: 12
u-blox NORA-W10 Series System Integration Manual preview
NORA-W10 Series
Brand: u-blox Pages: 56
z21 XL BOOSTER Quick Start Manual preview
XL BOOSTER
Brand: z21 Pages: 2
Parker EP Series Pro-Bloc Installation And Operation Manual preview
EP Series Pro-Bloc
Brand: Parker Pages: 11
Parker MT-700 Series Installer'S Manual preview
MT-700 Series
Brand: Parker Pages: 22
Parker HASV08R Quick Start Manual preview
HASV08R
Brand: Parker Pages: 2
HomeMatic HmIP-FAL230-C10 Installation And Operaion Manual preview
HmIP-FAL230-C10
Brand: HomeMatic Pages: 42

Brands by name

Popular brands

Load more brands