manualshive.com logo in svg

Toshiba A60 S1591 - Satellite - Celeron D 2.8 GHz, Maintenance Manual

Share
Download
Toshiba A60 S1591 - Satellite - Celeron D 2.8 GHz Maintenance Manual Download Page 2

 

ii                                                                    

Equium A60/Satellite A60/ Pro A60/A65  Maintenance 

Manual 

 

 

 

 

 

 

 

Copyright 

© 2004 by Toshiba Corporation. All rights reserved.  Under the copyright laws, this manual cannot 
be reproduced in any form without the prior written permission of Toshiba.  No patent liability is 
assumed with respect to the use of the information contained herein. 

Toshiba Equium A60/Satellite A60/ Pro A60/A65 Maintenance Manual 

Second edition Aug 2004 

Disclaime r 

The information presented in this manual has been reviewed and validated for accuracy.  The 
included set of instructions and descriptions are accurate for the Equium A60/Satellite A60/ Pro 
A60/A65 at the time of this manual's production.  However, succeeding computers and manuals are 
subject to change without notice.  Therefore, Toshiba assumes no liability for damages incurred 
directly or indirectly from errors, omissions, or discrepancies between any succeeding product and 
this manual. 

Trademarks 

Intel and Pentium are registered trademarks of Intel Corporation. 
IBM, IBM PC/XT, PC/AT, PS/2 and OS/2 are registered trademarks of IBM Corporation. 
MS-DOS and Windows XP home edition are registered trademarks of Microsoft Corporation. 
Sound Blaster and Pro are trademarks of Creative Technology Ltd. 
UNIX is a registered trademark of X/Open Company Ltd. 
NetWare are registered trademarks of Novell, Inc. 
All other properties are trademarks or registered trademarks of their respective holders. 
 

Summary of Contents for A60 S1591 - Satellite - Celeron D 2.8 GHz







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands