Toshiba A355-SC2902 User Manual Download Page 109

Page: 109 / 212

User’s Manual

5-5

A350/A350D

Zoom

: Pressing

Space

changes the display resolution.

TOSHIBA Zooming Utility (reduce)

Pressing

reduces the icon

size on the desktop or the font sizes within one of the supported application
windows.

TOSHIBA Zooming Utility (enlarge)

Pressing

enlarges the icon

size on the desktop or the font sizes within one of the supported application
windows.

FN Sticky key

You can use the TOSHIBA Accessibility Utility to make the

key sticky,

that is, you can press it once, release it, and then press an “

F Number

” key.

To start the TOSHIBA Accessibility utility, click

Start

All Programs

TOSHIBA

Utilities

Accessibility

Windows special keys

The keyboard provides two keys that have special functions in Windows:
Windows Start Button activates the

Start

menu and the other, the

application key, has the same function as the secondary mouse button.

This

key activates the Windows

Start

menu.

This

key has the same function as the secondary (right) mouse button.

Summary of Contents for A355-SC2902





















































































































































































































Search results

Summary of Contents for A355-SC2902

Reviews:

Related manuals for A355-SC2902

Brands by name

Popular brands

Toshiba A355-SC2902, User Manual

Search results

Summary of Contents for A355-SC2902

Reviews:

Related manuals for A355-SC2902

Brands by name

Popular brands