13
Introduction / Getting started
Turning the TV on
Switching on the TV
Connect the power cord to a wall outlet, the
!
power indicator lights in red (standby mode).
1
Press
1
on the remote control or
!
on the TV
left side panel, the
!
power indicator lights
in green.
NOTE:
If you watch black and white programmes when the
Colour System
mode is set to “
A”
(
Automatic
), colour
noise may appear on the screen. In this case select the
appropriate
Colour System
(For the system of each
country or region, refer to pages 16, 57).
Switching off the TV
1
Press
1
on the remote control or
!
on the TV
left side panel to switch to the standby mode.
NOTE:
•
When the TV will not be used for a long period of
time, such as during vacation or travel, remove the
power plug from the wall outlet.
•
The TV will automatically turn off in 15 minutes
based on
No Signal Power Down
settings (
-
page 27) if no signal is detected.
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
•
If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power
is going to be off for a long time and you are going
to be away from your TV, unplug the power cord to
prevent the TV from turning on in your absence.
1
3D IR
— This sensor detects the 3D IR (for
58L9300 Series models only).
2
!
(power LED)
— Power indicator
(
-
page 13).
3
A
(aerial input terminal)
— Analogue aerial
signal input (
-
page 10).
4
o
PC/HDMI 2 (AUDIO) (input terminal)
—
PC audio input terminal is shared with HDMI
analogue audio input terminal, and their use can
be confi gured in the
AV Connection
menu
(
-
page 42).
5
o
RGB/PC (input terminal)
— For use when
connecting a personal computer (PC)
(
-
page 42).
6
USB 1-2 (input terminals)
— Insert your USB
storage device (photo, movie and music)
(
-
page 46).
7
o
HDMI 1-4 (input terminals)
— High-
Defi nition Multimedia Interface input receives
digital audio and uncompressed digital video
from an HDMI device or uncompressed digital
video from a DVI device. HDMI connection is
necessary to receive 1080p and Ultra HD signals
(
-
page 41).
HDMI 3 is compatible with MHL 1. For use when
connecting to a MHL-compatible device (
-
page 45).
8
(1) (Scart input terminal)
— For use when
connecting a Scart device or connecting an
RCA device when using a Scart to RCA adapter
(not supplied).
9
o
(2) COMPONENT / VIDEO INPUT (input
terminals)
— High-defi nition component video
and standard (analogue) stereo audio inputs, or
standard (composite) video and standard stereo
audio inputs (
-
page 40).
10
!
(power on/standby)
— Press to turn the TV
on/ standby (
-
page 13).
11
2
– +
(volume)
— These buttons adjust the
volume level.
U
u
(mode up/down) — These buttons select
programme position or input source.
12
p
/
o
(programme position or input source)
— This button switches to the programme
position or the input source selection. When
external input list is displayed, an input source
can be selected.
13
SD card slot
— Used to access video, music, or
photo fi les with SD card.
14
Headphone
— For use when connecting a
headphone.
15
O
DIGITAL AUDIO (OPTICAL) (output
terminal)
— For use when connecting an
amplifi er with optical type digital audio input
(
-
page 40).
5884L9300̲EN.indd 13
5884L9300̲EN.indd 13
2013/09/27 8:19:23
2013/09/27 8:19:23
Summary of Contents for 58L9300 Series
Page 60: ......
