Toshiba 40XV700A, Owner'S Manual

Page: 38 / 64

38
Other Digital TV features and settings
Using the System Information
This feature can be used to check the version of software
currently installed� When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc�
1
From the SETUP menu, press
s
or
r
until System
Information is selected�
2
Press
Q
to display the System Information �
TOSHIBA
System Information
2010
14.1.x.x Xxx xx 2010 - xx:xx:xx FW:xx
WEAK
Ch22
Poor
Ch25 Good
Ch35
Good
Ch46 Good
AVERAGE STRONG
Local Time Settings
• This feature is available when
Country
is set to
Australia
(
-
page 13)�
• This function allows you to manually set the time zone.
Please note that if you manually change the time zone
setting, all existing entries under Programme Timers will
become invalid as they are still based on the old time
zone. It is recommended that you delete all entries under
Programme Timers before proceeding with the steps
described below�
1
From the DTV Settings menu, press s or r to
select Local Time Setting �
2
Press
Q
, and then press s or r to select Time
Zone �
3
Press
v
or
w
to select the item you want to set�
( New South Wales , Northern Territory ,
Queensland , South Australia , Tasmania ,
Victoria , Western Australia , Australian Capital
Territory )
Local Time Setting
Time Zone
Local Time
New South Wales
11:30
4
Press
s
to select Local Time , and then press
v
or
w to set as required�
Viewing the Software Licences
The licences for the software used in this TV are available
for viewing on screen�
1
From the SETUP menu, press
s
or
r
until
Software Licences is selected�
2
Press Q �
A screen will appear displaying all of the licencing
information required for the TV’s software�
Setting the Digital Audio
Digital Audio Output
1
From the PREFERENCES menu, press
s
or
r
to
select AV Connection , and then press
Q
�
2
Press s or r to select
Digital Audio Output
�
AV Connection
PC/HDMI 3 Audio
HDMI Settings
HDMI 3 Audio
Woofer
Digital Audio Output
Digital
Internal
Auto
PC
Input Labeling
3
Press
v
or
w
to select Auto or PCM
Auto : This mode outputs Dolby Digital or PCM to
the digital audio output socket providing it is
being broadcast�
PCM : Select this when a 2ch digital stereo amplifier is
connected to the TV� When you select a Dolby
Digital or MPEG audio track, the sound is
converted to the PCM (2ch) format and output�
Dynamic Range Control
This feature allows control of audio compression for
digital TV programmes excluding those with MPEG-1 and
MPEG-2 audio�
1
From the
SOUND
menu, press s or r to select
Dynamic Range Control
�
2
Press v or w to select On or Off �