Toshiba 40XV648U - 40" LCD TV, Owner'S Manual

Page: 54 / 70

54
Chapter 7: Using the TV’s advanced features
Using the Expert Mode
This feature individually enables/disables the Red,
Green, and Blue components of the picture to allow for
more accurate adjustment of each color.
1
From the PICTURE menu, highlight A d vance d
Picture S ettin g s and press
T
.
2
Press
B
or
b
to select the Expert Mo d e , and then
press
T
.
3
Press
B
or
b
to select either Re d , G reen or Blue you
want to adjust.
4
Press
C
or
c
to select On .
5
Press
b
to select Color or Tint , and then press
C
or
c
to adjust then press
O
.
Note:
• If the Picture Mode is set to AutoView , this feature will
be grayed out.
•
When the Expert Mode menu is exited, the On/Off
modes of Red , Green and Blue are no longer valid.
• It is not possible to turn off all three colors at the same
time.
Using the ClearFrame™ feature
The ClearFrame 120 Hz anti-blur technology doubles
the frame rate from 60 frames per second to 120 frames
per second, virtually eliminating motion blur without
adding flicker or reducing image brightness.
1
From the PICTURE menu, highlight A d vance d
Picture S ettin g s and press
T
.
2
Press
B
or
b
to select ClearFrame .
3
Press
C
or
c
to select
On
, then press
O
.
Note: If the Picture Mode is set to Game , this feature will
be grayed out.
Using the MPEG NR feature
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression.
1
From the PICTURE menu, highlight A d vance d
Picture S etin g s and press
T
.
2
Press
B
or
b
to select
Noise Re d uction
and press
T
.
3
Press
B
or
b
to highlight the
MPE G NR
.
4
Press
C
or
c
to select either Off , Low , Mi dd le , or
Hi g h
and press
T
.
Note: If the Picture Mode is set to Game , this feature will
be grayed out.
Using the DNR feature
DNR enables you to “soften” the screen representation
of a weak signal to reduce the noise effect.
1
From the PICTURE menu, highlight A d vance d
Picture S ettin g s and press
T
.
2
Press
B
or
b
to select Noise Re d uction and press
T
.
3
Press
B
or
b
to select DNR .
4
Press
C
or
c
to select Low , Mi dd le , Hi g h , Auto or
Off and press
T
.
Note:
•
If the Picture Mode is set to Game , this feature will be
grayed out.
• The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high)