Chapter 8: Using the TV’s network features
68
6
Press
S
or
T
to highlight
Authentication
, and
then press
W
or
X
to select
Open System
,
Shared
Key, WPA-PSK
or
WPA2-PSK
.
7
Press
S
or
T
to highlight
Encryption
, and then
press
W
or
X
to select
None
,
WEP
,
TKIP
or
AES
.
Note:
U
Certain encryption types are only compatible
with specific authentication types.
− When Authentication is Open System, only
WEP or None is compatible.
− When Authentication is Shared Key, only
WEP is compatible.
− When Authentication is WPA-PSK or WPA2-
PSK, only TKIP or AES is compatible.
U
When incompatible Authentication/Encryption
pairings are attempted, a warning message
will be displayed, and no connection attempt
will be made until the incompatibility is
resolved.
U
Key ID of WEP encryption to set is only one.
8
Press
S
or
T
to highlight
Security Key
, and press
. The Software Keyboard window will appear.
9
Input the Security Key by using the Software
Keyboard (
page 70). To save your setting,
press the
BLUE
button.
Note:
This item is grayed out when
Encryption
is
None
.
10
Highlight
Done
, and then press
.
Note:
When
Encryption
is
None
, a message
will appear. Press
W
or
X
to select
Yes
and
press
.
Note:
Settings are not saved if
is pressed
before
Done
is selected.
Wireless Information
The settings configured in
Wireless Setup
can be
confirmed.
1
Press
and open the
Quick
menu.
2
Press
S
or
T
to select
Wireless Information
, and
press
.
3
When the AP connection succeeds, a Wireless
Information window will appear.
Note:
Press the
RED
button if you confirm
the situation of surrounding APs.
Item
Description
Status
Connected
is displayed when the
TV is connecting with the AP.
Disconnected
is displayed when the
TV is disconnecting with the AP.
Signal
Connection signal strength with AP
(
STRONG
/
MEDIUM
/
WEAK
)
Speed
The link speed with AP
Mode
Working mode (11a, 11b, 11g, 11n)
Channel
A channel in use (1-165)
Network Name
SSID set
Authentication
Authentication set
Encryption
Encryption set
Security Key
Security Key set
AP MAC
Address
The AP’s MAC address is displayed
when the TV is connecting with AP.
USB MAC
Address
The MAC address of USB (Dual
Band WLAN Adapter) is displayed.
DHCP
Enabled
is displayed when you use
DHCP.
Disabled
is displayed when you do
not use DHCP.
IP Address
The TV’s IP address
Subnet Mask
Value of the Subnet Mask
Default
Gateway
Address of the Default GATEWAY
DNS
Address of the DNS
Note:
Even if AP for IEEE 802.11n is used when
Encryption
is set to
WEP
or
TKIP
, the Speed
value might be low.
Encryption
is recommended
to be changed to
AES
(
left-hand column).
(continued)
