30
Connecting your TV
• Most of the picture/sound controls and
functions are available. However features not
available will be greyed out.
Back connections
Connection example
VCR (Normal)
DVD video player
(with component
video outputs)
Set Top Box
or
Audio system
TV back view
or
• Before connecting any external equipment,
turn off all main power switches.
• The unauthorized recording of TV
programmes, DVDs, video tapes and other
materials may infringe upon the provisions of
copyright law.
• The
COMPONENT VIDEO INPUT
consists
of three component video signals (
Y
,
P
B
/
C
B
,
P
R
/C
R
) and provides the best picture
performance. These terminals can only be
used with the component video compatible
equipment e.g. DVD video player, etc.
• If you connect to COMPONENT
VIDEO for
the
COMPONENT / VIDEO INPUT
terminals,
screen display will appear changes to
COMPONENT
.
• Additional equipment and cables shown are
not supplied with this TV.
Note:
o
(1) COMPONENT / VIDEO INPUT terminals
Standard video mode:
Use terminals Y, L and R.
Red
Yellow
White
Component video mode:
Use terminals Y, PB/CB, PR/CR, L and R.
Red
(Audio) White
Green
Blue
Red
Connecting an audio system
You can enjoy high quality dynamic sound by
connecting the TV to an audio system.
Notes:
• DO NOT connect the
DIGITAL AUDIO
output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
• Connect the
DIGITAL AUDIO
output terminal
to the
OPTICAL
input of a receiver or processor.
• Refer to the owner’s manual of the connected
equipment as well.
• When you connect the TV to other equipment,
be sure to turn off the power and unplug all
of the equipment from the wall outlet before
making any connections.
• The output sound of the TV has a wide
dynamic range. Be sure to adjust the audio
amplifi er’s volume to a moderate listening level
before turning on the power. Otherwise, the
speakers and your hearing may be damaged
by sudden high volume audio.
• Turn off the amplifi er before you connect or
disconnect the TV’s power cord. If you leave
the amplifi er power on, the speakers may be
damaged.
Warning:
When you are connecting (via the
DIGITAL
AUDIO
output terminal) an AV decoder that
does not have Dolby Digital decoding function,
be sure to set
PCM
for Digital Output menu
(
-
page 19). Otherwise, the speakers and
your hearing may be damaged by sudden high
volume audio.
4046TL20ETV̲En.indd 30
2011/11/16 8:15:27
Summary of Contents for 40TL20 Series
Page 52: ......
