background image

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

 

LCD TV

September  2007

YK

No.055E

L37X01A

L42X01A

SERVICE MANUAL

Be sure to read this manual before servicing. To ensure safety from 

fi

 re, electric shock, injury, harmful 

radiation and materials, various measures are provided in this LCD TV.
Be sure to read cautionary items described in the manual before servicing.
These servicing instructions are for use by quali

fi

 ed service personnel only. To reduce the risk of electric 

shock, do not perform any servicing other than that described in the operating instructions unless you 
are quali

fi

 ed to do so.

Caution

 

1. Since the Panel Module and the front Filter are made of glass, handling the broken Module and Filter 

carefully and with caution in order not to receive injury.

2. Replacement work should be started after the Panel Module and the AC/DC Power supply have 

become suf

fi

 ciently cool.

3. Special care should be taken when working near the display area in order not to damage its surface.
4. The Panel Module should not be touched with bare hands in order to protect its surface from 

blemishes and damage.

5. It is recommended that you use clean soft gloves during the replacement work in order to protect not 

only the display area of the Panel Module but also yourself.

Service Warning

  

L37X01A : The LCD panel made from IPS-Alpha is used for this product.
L42X01A : The LCD panel made from LPL is used for this product.

1.Features  ······················································· 3
2.Speci

fi

 cations  ··············································· 4

3.Component names  ······································· 7
4.Service points  ·············································· 10
5.Adjustment  ·················································· 11
6.Troubleshooting  ·········································· 17
7.Hotel Menu Operation  ································· 20

  8.Block Diagram  ··········································· 23
  9.Connection Diagram  ································· 26
10.Wiring Diagram ·········································· 27
11.Printed Wiring Board Diagram  ··················· 29
12.Disassembly Diagram  ······························· 38
13.Replacement Parts List  ····························· 45

Contents 

Summary of Contents for L37X01A

















































Reviews: