Toshiba 40CV600E, Owner'S Manual

Page: 19 / 36

19
Using the TV’s features
Notes:
• Game mode is available in external input mode
(other than aerial input). When you select
Game mode, suitable widescreen formats will
be selected.
• PC mode is available in RGB/PC input mode or
HDMI input mode.
1
From the PICTURE menu press
V
or
U
to
select Picture settings .
PICTURE
Picture settings
3D Colour management
Base colour adjustment
Active Backlight Control
MPEG NR
DNR
Off
On
Low
Auto
2
Press
Q
, then press
V
or
U
to select
Picture Mode .
Picture settings 1/2
Picture Mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Black/White Level
Standard
Middle
70
50
50
0
0
70
3
Press
Y
or
Z
to select the picture mode you
prefer and press
Q
.
Activating the picture preferences
You can customise current picture mode
settings as desired. For example, while selecting
"
Dynamic ," if you change the following items,
such as Picture settings items, your new setting
is saved as Dynamic-user .
1
From the Picture settings menu press
V
or
U
to select either Backlight , Contrast ,
Brightness , Colour , Tint or Sharpness and
press
Q
.
2
Press
Y
or
Z
to adjust the settings.
Setting the black/white level
Black/White Level improves the defi nition of
dark areas of the picture.
1
From the Picture settings menu, press
V
or
U
to select Black/White Level .
2
Press
Y
or
Z
to select High, Off, Low or
Middle .
Black/White Level Middle
Using the cinema mode
A movie fi lm’s picture runs at 24 frames a
second, whereas movie software such as DVD,
etc., that you enjoy watching on television at
home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a
smooth motion and picture quality, select the
On
mode.
Effective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i, 576i or
1080i signals.
1
From the Picture settings menu, press
V
or
U
to select Cinema mode on the 2nd page.
Picture settings 2/2
Cinema mode
Colour Temperature
Reset
Off
2
Press
Y
or
Z
to select On or Off .
Note:
When a DVD movie with subtitle is playing back,
this mode may not work correctly.
Adjusting the colour temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green
or blue tint.
1
From the Picture settings menu, press
V
or
U
to select Colour Temperature on the 2nd
page, then press
Q
.
42CV600ET_En.indd 19 42CV600ET_En.indd 19 8/18/2009 1:39:33 PM 8/18/2009 1:39:33 PM