Toshiba 37XV500A, Owner'S Manual

Page: 36 / 44

36
Connecting your TV
Selecting the PC/HDMI1 audio mode
You can select PC audio or HDMI1 audio when using this
function (
-
page 35).
1
Press
M
, then press or to display the SET UP
menu.
2
Press or to select AV connection , then press
Q
to display the
AV connection
menu.
3
Press or to select
PC/HDMI1 audio
, then press
or to select PC or HDMI1 .
Setting the HDMI1 audio mode
You can select sound of an HDMI or DVI device connected to
the HDMI1 input terminals (
-
page 35) from three modes:
Auto , Di g ital or Analo g .
Note:
This function is available only when the PC/HDMI1 audio mode
is set to
HDMI1
.
1
From the AV connection menu, press or to select
HDMI1 audio .
2
Press or to select
Auto
,
Di g ital
or
Analo g
.
Selecting the HDMI setting
The HDMI setting menu consists of the following 3 items:
Deep Colour , x.v.Colour and Lip Sync . Some early
HDMI equipment may not work properly with your HDMI
TV. If you experience trouble, unplug your HDMI cable first
and then try setting these three options to
Off . This should
allow your early HDMI source to operate properly with your
TV.
1
From the
AV connection
menu, press or to select
HDMI settin g , then press
Q
.
2
Press or to select each item, then press or to
select the desired setting.
Deep Colour mode
This function increases the available colours from the HDMI
source to increase the boundaries defined by the RGB or
YCbCr colour space.
x.v.Colour
This function expands the acceptable colour range (limits) of
HDMI signals, then allows sending the wider colour signals
from HDMI sources.
Lip Sync mode
This option activates an auto audio/video display timing
adjustment function that allows HDMI source devices to
accurately perform synchronization automatically.
All above HDMI settings require a proper HDMI source
device.
If HDMI source products do not support these functions, the
TV may not work properly by activating these functions.
Notes:
• In a non-HDMI signal mode, this function is not available.
• If your HDMI connection is capable of 1080p and/or your TV
is capable of refresh rates greater than 60Hz or supports
Deep Colour, you will need a Category2 cable. Conventional
HDMI/DVI cables may not work properly with this mode.
Selecting the AV output mode
You can select the AV output from three modes; ATV , DTV or
Monitor
.
1
From AV Connection menu, press or to select AV
Output
.
2
Press or to select the desired output mode.
ATV
: Selected programmed channel from Analog
TV system is output from the
AV OUTPUT
terminal.
DTV : Selected programmed channel from Digital
TV system is output from the
AV OUTPUT
terminal.
Monitor
: The AV output depends on the selected video
input mode.
(e.g. If
o
1 is selected (
-
page 25), the AV
signal input to
o
1 is output from the AV
OUTPUT
terminal.
Note:
When it is set to Monitor (and in DTV mode) or DTV , and the
digital programme is locked, the output will be blank and audio
will be muted.
MENU Back Watch TV EXIT
PC/HDMI1 audio
HDMI1 a u dio
AV connection
PC
Digital
HDMI setting
A V o u tp u t AT V
OK
MENU Back Watch TV EXIT
PC/HDMI1 a u dio
HDMI1 audio
AV connection
HDMI1
Auto
HDMI setting
A V o u tp u t
AT V
OK
MENU
Back Watch TV
EXIT
Deep Colour
x.v.Colo u r
HDMI settin g
On
On
On Lip Sync