Toshiba 37XV500A, Owner'S Manual

Page: 20 / 44

20
Using the TV’s features (General)
1
Select Picture settin g s from the PICTURE menu.
2
Use and to adjust the Backli g ht , Contrast ,
Bri g htness
,
Colour
,
Tint
, and
Sharpness
.
Setting the black/white level
Black/White Level improves the definition of dark areas of
the picture.
1
From the
Picture settin g s
menu, press or to
select Black/White Level on the 2nd page.
2
Press or to select
Hi g h
,
Off
,
Low
or
Middle
.
Using the cinema mode
A movie film’s picture runs at 24 frames a second, whereas
movie software such as DVD, etc., that you enjoy watching on
television at home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a smooth motion
and picture quality, select the
On mode.
Effective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i, 576i or 1080i signals.
1
From the
Picture settin g s
menu, press or to
select Cinema mode on the 2nd page.
2
Press or to select
On
or
Off
.
Note:
When a DVD movie with subtitle is playing back, this mode
may not work correctly.
Adjusting the film stabilization
The Film Stabilization function allows the adjustment of
improves motion smoothness.
1
From the Picture settin g s menu, press or to
select Film Stabilization on the 2nd page.
2
Press or to select Smooth , Off or Standard .
Using Activating the ClearFrame
This function eliminates motion blur without adding flicker or
reducing image brightness, improves the viewing quality of a
motion picture.
1
From the
Picture settin g s
menu, press or to
select ClearFrame on the 2nd page.
2
Press or to select
On
or
Off
.
Adjusting the colour temperature
Colour Temperature
increases the warmth or coolness of
the picture by setting the red, green or blue tint.
1
From the Picture settin g s menu, press or to
select
Colour Temperature
on the 2nd page, then press
Q
.
2
Press or to select
Cool
,
Natural
, or
Warm
to suit
your preference, then press
M
.
3
Press or to select Red Level , Green Level or
Blue Level
, then press or to adjust the setting as
required.
Resetting the picture settings
This function returns the picture settings to the factory settings.
1
From the Picture settin g s menu, press or to select
Reset on the 3rd page.
2
Press
Q
.
Activating the MPEG NR (Noise Reduction)
If the receiving signal of MPEG is a mosquito (grained) noise
depending on the compression and conversion, the noise may
be reduced when using this function.
1
From the PICTURE menu, press or to select
MPEG NR
on the 2nd page.
2
Press or to select Off , Low , Middle or Hi g h .
Note:
In the PC input mode (
-
page 25), this mode is not available.
Activating the DNR (Digital Noise
Reduction)
- analog only -
If the receiving signal is weak and the picture is blurry, the
picture may be improved when using this function.
1
From the PICTURE menu, press or to select DNR
on the 2nd page.
2
Press or to select Auto , Off , Low , Middle or Hi g h .
Colo u r
Brightness
Pict u re Mode
MENU
Back Watch TV
EXIT
Dynamic
50
50
0
Tint
Back li g ht 100
Picture settin g s 1/3
Contrast 100
Black/White Level
Hi g h
Blue Le v el
Color Temperature
ME N U Back Watch TV EXIT
Cool
0
Red Le v el
0
Color Temperature
Green Le v el
0
MPEG NR Hi g h
DNR Auto