Toshiba 37XV500A, Owner'S Manual

Page: 25 / 44

25
Using the TV’s features (General)
• If TV is already turned on when Alarm is activated, the TV will
simply switch to the specific TV mode or channel at the
Alarm start time.
• If TV is already running the Programme Timer when Alarm is
set to activate on DTV mode, on Alarm activation the Alarm
will only turn on the TV (if it was in standby) but not switch to
the channel specified in the Alarm setting.
• If TV is already running the Programme Timer when Alarm is
set to activate on a TV mode other than DTV, the Alarm will
perform normally.
• If you do not press any button on the side panel of the TV or
the remote control within 2 hours after Alarm is activated, the
TV will enter standby automatically.
Setting the sleep timer
The Sleep timer is especially useful if you want the TV to turn
itself off after a selected period of time.
1
Press
M
, then press or to display the TIMER menu.
2
Press or to select
Sleep timer
.
3
Press Number buttons (0-9) to set the time period to turn
off the TV. Alternatively, press or to set the time
period. The timer display will set in blocks of 10 minutes
to 12 hours and 50 minutes. If you press and hold
or
to set the time period, timer display will set in blocks of
30 minutes up to 12 hours 30 minutes.
4
Press
P
to start the timer.
Selecting the video input source to
view
1
Press
o
on the remote control to display the video input
mode list, then press or to select appropriate input
source (or press
o
on the TV side panel or
o
on the
remote control repeatedly to select required input source
directly). In Analog TV, you may also press
Q
to display
the video input mode list.
2
Press
Q
.
DTV (Digital TV)
o
1 (
o
(1), video 1 input),
o
2 (
o
(2), video 2 input) or
o
2S (S-video input),
o
3 (
o
3, component video input),
HDMI1, HDMI2, HDMI3 (HDMI input),
PC (
o
RGB/PC, PC input)
ATV (Analog TV)
Notes:
• When the component video input, PC input mode or HDMI
input mode is selected, the
AV OUTPUT terminals (
-
page
33) output audio signal only.
• If a REGZA-LINK device is connected to an HDMI input, the
REGZA-LINK icon will appear.
• When the TV is switched on, it will take a few minutes for the
REGZA-LINK icon to appear in the list; when an HDMI cable
is removed, it will take a few minutes for the icon to
disappear.
• If the HDMI cable from connected device is changed or
HDMI device setting are changed,
Enable REGZA-LINK in
the REGZA-LINK menu may need to be reset to On .
Setting the manual setting menu
- analog only -
1
Press
M
, then press or to display the SET UP
menu.
2
Press or to select Manual settin g , then press
Q
.
3
Press or to select an item, then press or to
select the item as shown below.
A. Colo u r System
Confirm that colour system is set to “ A ” (Auto). If not,
select “
A
” with or .
B. V ideo la b el
The video label allows you to label each input source
for your TV.
To change or create video labels:
1) Press
or repeatedly to select a character for
the first space, then press .
2) Repeat step 1) to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose a blank space from the list of
characters.
3) Press
Q
to store your settings.
TIMER
MENU
Back Watch TV
EXIT
Sleep timer 00:00
Ex. PC VGA mode
PC VGA
ATV
HDMI1
HDMI2
HDMI3
PC
DTV
2
3
1
REGZA-LINK
Man u al setting
OK A V connection
OK Pict u re position
OK
Lang u age
SET UP
MENU Back Watch TV EXIT
English
A B
MENU
Back Watch TV
EXIT
OK
Manual settin g
Store
A
Colo u r system:A u to
EXT1
*(blank space)