English
23
Q
uestions
and
A
nswers
continued
Language
ENGLISH
Colour
AUTO
Teletext
Set up
EXIT
: To exit
A
Good performance of text depends on a good
strong broadcast signal. This normally requires a
roof or loft aerial. If the Text is unreadable or garbled,
check the aerial. Go to the
main index
page of the teletext
service and look for the
User Guide
. This will explain the
basic operation of teletext in some detail. If further
information is needed on how to use text
see the
teletext section.
Why are there problems with teletext?
Q
A
There are none broadcast or they have not yet
loaded. Press the
X
(
B
) buttton to access.
(See teletext section).
Why are there no teletext sub-pages?
Q
A
If surround sound effects are unavailable from the
rear speakers whilst playing a Dolby Surround
video tape, check that the VCR is a stereo unit and is
connected by a SCART lead. Then check the
Surround
set up
in the
Feature menu
.
Why is there no Dolby Surround?
(ZP48 models only)
Q
A
If full Dolby Digital is unavailable, check that the
Rear speaker
option in
Surround set up
is set to
YES
, that the equipment is connected by optical or coaxial
cable as well as through a SCART socket or
COMPONENT VIDEO INPUT. Also check that
EXT 2
or
EXT 4
is selected in
AV connections
.
If external front speakers are connected the External
speaker switch must be set to
EXT
to get the full benefit of
Dolby Digital. If the switch is set to
INT
the external
speakers will not function.
Turn the television off
before changing the position of the switch.
Why is there no Dolby Digital?
(ZP48 models only)
Q
A
Connect the source via a SCART lead and play.
Select the
Set up
menu.
Why are the colours wrong when an NTSC
source is played?
Q
Set the Colour to
AUTO
and exit.
Go to the
Picture
menu and adjust the tint.
1
2
A
Check the SCART lead connections.
Why is there sound but no picture from external
equipment?
Q
A
Check that the External speaker switch has been
set to
EXT
.
Why is there no sound from the external front
speakers? (ZP48 models only)
Q
A
Check the SCART lead connections. Check the
AV
Connections
. Make sure Digital Input has not
been selected on ZP48 models.
Why is there no sound from external
equipment?
Q
A
Check that the
Rear speaker
option in
Surround
set up
is set to
YES
and the
Surround out
option
is set to
SP OUT
.
Why is there no sound from the external rear
speakers? (ZP48 models only)
Q
A
Check that the
Rear speaker
option in
Surround
set up
is set to
YES
and the
Surround out
option
is set to
EXTERNAL
.
Why is there no sound from the connected
external amplifier? (ZP48 models only)
Q