English
17
Back
Digital input-1
EXT 4
Digital input-2
EXT 2
EXT3 input
AV
EXT3 output
EXT 1
Back
Digital input-1
EXT 4
Digital input-2
EXT 2
EXT3 input
AV
EXT3 output
EXT 1
Input selection and AV connections
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6
for a clear view of the back connection recommendations.
Select
AV connection
.
Use
S
or
R
to change the
EXT3 output
option to:
MONITOR
= The picture on screen.
TV
= The last television programme selection.
EXT 1
= The picture from equipment connected
to SCART 1.
EXT 2
= The picture from equipment connected
to SCART 2.
EXT 5
= The picture from equipment connected
to the front input sockets.
This enables selection of the source to
output
from
SCART 3. For example, to record transmissions in stereo
from a stereo decoder – connect a stereo decoder to
SCART 1 and stereo VCR to SCART 3, then select
EXT 1
as the
EXT3 output
. The signal received through SCART
1 will output directly through SCART 3.
Most VCRs and decoders send a signal through the SCART
lead to switch the television to the correct
Input
socket.
Alternatively press the external source selection button
B
until the picture from connected equipment is shown. This
button must be used to view equipment connected using
the COMPONENT VIDEO INPUT (
EXT 4
).
An
S
in the display e.g.
EXT 3S
, indicates the input is set
for an S-Video signal.
Digital Audio
on the screen indicates that the external
source has been set as a digital audio input. (ZP48 only)
Input selection – Digital Audio signal
(ZP48 models only)
Output selection – signal for SCART 3
1
1
2
This television is provided with 2 digital audio inputs – DA-1
and DA-2 – so that equipment can stay permanently
connected.
For example
: connect the video signal from a DVD to the
Component Video Input (
EXT 4
) and from a games
console to SCART 2 (
EXT 2
), connect the audio cables to
the inputs on the back of the television. Match the two up
as follows:
If DA-1 (optical) has been connected to the DVD
player, select
AV connection
from the
Feature
menu
and press
Q
to highlight
Digital input-1
,
then press
S
or
R
to select
EXT 4
.
AV connection
Back
Digital input-1
EXT 4
Digital input-2
EXT 2
EXT3 input
AV
EXT3 output
EXT 1
This specifies the type of signal going into SCART 3 (
EXT3
)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
Input signal selection (ZP46 and ZP48)
1
Press
B
to select
B
1
,
B
2
,
B
3
,
B
4
or
B
5
(
EXT 1-5
).
To return to television mode press
B
again or
one of the numbered buttons.
Use the Input Selection if the television does not switch
over automatically.
Input selection
1
2
2
For the second connection, press
Q
to highlight
Digital input-2
(coaxial), then
S
or
R
to select
EXT 2
for the games console.
From the
Feature menu
select
AV connection
and with
S
or
R
select either
AV
or
S-VIDEO
as
the required
input
for
EXT 3
.
If the colour is missing try the alternative setting.
