57
Setting up your TV
Favorites browser
If a digital channel is not programmed, either through the automatic
channel scan or the Channel add function, see
, you will have to tune the RF channel using the Channel Numbers
and the (
Dash 100
) button on the remote control.
Switching between two channels using Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the
Channel Number
buttons
(and the (
Dash 100
) button if selecting a digital channel).
3
Press the
CH RTN
button on the remote control. The previous
channel will display. Each time you press the
CH
RTN
button,
the TV will switch back and forth between the last two channels
that were tuned.
If you press the
CH RTN
button from a non-antenna input, the TV
will return to the last-viewed input.
Switching between two channels using SurfLock™
The SurfLock™ feature temporarily “memorizes” one channel to
the
CH RTN
button, so you can return to that channel quickly from
any other channel by pressing the
CH RTN
button.
To memorize a channel to the
CH RTN
button:
1
Tune the TV to the channel you wish to program into the
CH
RTN
button.
2
Press and hold the
CH RTN
button for a few seconds until the
message “Memorized” appears on the screen. The channel has
been programmed to the
CH RTN
button.
3
You can then change channels repeatedly, and when you press
the
CH RTN
button, the memorized channel will be tuned.
The TV will return to the memorized channel one time only. Once
you press the
CH RTN
button and then change channels again, the
CH RTN memory will be cleared and the button will function as
Channel Return, by switching back and forth between the last two
channels that are tuned.This feature also works for external inputs.
