45
Setting up your TV
To program channels automatically:
1
Configure the antenna input source, if you have not already
done so, see
2
Press the
MENU
button and open the
Installation
menu.
3
Highlight
Channel Tuning
, and then press the
ENTER
button.
(Sample Image) Setup menu - Installation selection
4
Highlight
Auto Tuning
, and then press the
ENTER
button to
open the
Channel Program menu
to begin channel
programming.
Cable
Scanning channels, please wait...
Number of Channels Found - 7
Scanning Analog Channels
6%
Channel - 9
Cancel
!
(Sample Image) Installation menu - Channel selection
The TV will automatically cycle through all the antenna/cable
channels, and store all active channels in the channel memory.
While the TV is cycling through the channels, the message
“Scanning channels, please wait” appears.
5
To cancel channel programming, press the
EXIT
button on the
remote control or highlight
Cancel
in the on-screen display,
and then press the
ENTER
button.
When channel programming is complete, press the
CH
▲
/
▼(arrow) buttons to view the programmed channels.
