16
Manual TV station presetting
If you like, you may manually tune a certain station into a selected programme position, without deleting or modifying program
position’s contents. The presetting applies to both analogue and digital TV. Press the
ATV/DTV
button to enter ATV or DTV
mode then follow the steps to set the TV stations manually.
Note:
• Usually fine tuning is not
necessary, due to tuning’s
automatically stopping at
the very best position. If
you fine-tune anyway,
proper working of teletext-
reception with built-in
tuner is no longer
guaranteed.
Preparation:
Connect the aerial cable. Select programme position “2”. Press
2
,
OSD will indicate ‘2’ in left
upper corner. Eventually recently stored TV-channel’s name might also appear.
1
Press
MENU SETUP
or
DIGITAL MENU
to display the Main Menu screen.
2
Press
to select the “Channel” menu, then
press
ENTER/CH LIST
.
3
Press
to select the “Manual Tuning” menu,
then press
ENTER/CH LIST
.
4
In ATV mode:
(1) Press
to select “Search”, then press
to start tuning. Tuning will stop
automatically at next received station.
(2) If you like to use fine-tuning, select “Fine”. Press
to fine tune. See the note on
this page.
(3) To select a colour system for your TV, select “Colour System”. Press
to select
“Auto”, “PAL” or “SECAM”. PAL should be selected for use in UK.
(4) To select a sound system, select “Sound System”. Press
to select “Auto”,
“B/G”, “I”, “D/K” or “L/L’ ”.
In DTV mode:
You can select a channel number for the Channel List by pressing
. The
corresponding tuning frequency for the channel will be set. Or, you can enter a frequency
value to start tuning.
After setting the channel, press
ENTER/CH LIST
to start scanning for channels.
A progress bar appears to indicate scanning progress and a list of the services collected
from the channel will be listed.
5
Press
EXIT/CANCEL
to return to the normal screen.
/
/
/
/
/
/
/
/
