English
- 17 -
English
Controlling the TV
A wide variety of external equipment can be connected via the sockets located on the side and back of the
TV.
Whilst all the necessary adjustments and controls for the TV are made using the remote control, the
buttons on the left side of the TV may be used for some functions.
Switching on
If the standby LED is unlit, check that the mains plug is con-
nected to the power and press
button on the left side of
the TV to switch the television on. Then the LED lights up in
white. If the picture does not appear, press
button on the
remote control; it may take a few moments.
To put the television into Standby, press
button on the
remote control. To view the television, press
button again.
The picture may take a few seconds to appear.
Note
: The active Standby LED may appear for a few moments
when the TV is switched off.
For energy saving:
Turning the TV off at its mains supply, or un-plugging it, will
cut energy use to nearly zero for all TV’s. This is recom-
mended when the TV is not being used for a long time, e.g.
when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy ef
fi
ciency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE
: Putting the TV into standby mode, will reduce energy
consumption, but will still draw some power.
Using the Remote Control
Press
MENU
button on the remote control to see the
menus.
The main menu appears as a group of icons each for a
menu option. Press
Left
or
Right
button to select a topic,
and press
OK
button.
In sub menu screen
mode the menu appears as a list. Press
Up
or
Down
button to select a topic, and press
OK
button.
To use the options press
Up
or
Down
button on the remote
control to move up and down through them and
OK
button,
Left
or
Right
button to select the required choice. Follow
the on screen instructions. The functions of each menu are
described in the manual.
Using the Controls and Connections on the TV
Using the control buttons on the side of the TV:
• To alter the volume, press “
P/V/AV
” button once and then
use “
+/-
” buttons to increase or decrease volume, so a
volume level scale (slider) will be displayed on the screen.
While Tv is on, +/- button can use as or volume
- as default.
• To alter the programme press “
P/V/AV
” button once and then
use “
+/-
” buttons to change channel. By pressing “
+/-
” button,
you can select the next or previous programme.
• To select an external input, Hold the “
P/V/AV
” button, source
OSD will be displayed in a few second. Use “
+/-
” buttons to
change source.
NOTE
: The USB socket has limited functionality, and Toshiba
can take no responsibility for damage to other connected
equipment.
Please always refer to the owner’s manual of the equipment
to be connected for full details.
White Standby LED
+/- control/volume buttons
Programme / Volume / AV Function
Standby / On button
IR receiver
19DV501B_DVD_A01_MB60_[GB]_(01-TV)_(IB_INTERNET)_DVB-T_(1900UK)_10072930.indd 17
19DV501B_DVD_A01_MB60_[GB]_(01-TV)_(IB_INTERNET)_DVB-T_(1900UK)_10072930.indd 17
03.10.2011 18:34:02
03.10.2011 18:34:02