![background image](http://html.mh-extra.com/html/toshiba/1550/1550_service-manual_425090212.webp)
1550/1560 UNPACKING PROCEDURE
18 - 16
Mar. 1998 © TOSHIBA
6. Reinstalling the rear covers
(1) Reinstall the rear covers of the copier and
the MY-1004.
(2) Return the cassettes to the original posi-
tions, respectively.
C.
Operation Check of the MY-1004
(1) Plug the copier’s power cord into the elec-
trical outlet and turn on the power switch.
(2) Set sheets of paper in the MY-1004’s cas-
sette.
(3) Selecting the MY-1004’s cassette, make a
few copies and check that the MY-1004
operates normally.
(4) Fasten the paper guide
!º
using the fixing
screws
9
provided, as shown (4 places).
Note: When fastening the paper guide
!º
,
check to make sure that the separation
roller pressure springs
!¡
are fitted in the
separation roller holders of the copier and
the MY-1004, respectively.
(5) Close the outer panel of the paper guide
0
.
Summary of Contents for 1550
