![background image](http://html.mh-extra.com/html/toshiba/1550/1550_service-manual_425090129.webp)
Mar. 1998 © TOSHIBA
11 - 3
1550/1560 CLEANER
11.3 Disassembly and Replacement
11.3.1
Cleaner unit
(1) Remove the process unit. Refer to para. 9.3.1.
(2) Remove the drum (when it is to be replaced).
•
Remove the developer unit.
•
Remove the main charger unit.
•
Disengage the two claws to remove the mo-
tor cover.
Main charger
unit
Motor cover
Developer unit
Drum shaft
[Front side]
Drum
•
Unlock the drum shaft lock (by rotating it in
the direction of the arrow) and then pull the
shaft out from the front.
•
When removing the drum, place your hands
on the sides of the drum, as shown in the
figure on the right and take it out carefully.
Summary of Contents for 1550
