DISASSEMBLY INSTRUCTIONS
B1-2
1-5: DVD DECK (Refer to Fig. 1-5)
1.
2.
3.
Remove the 2 screws
1
.
Remove the 2 screws
2
.
Remove the DVD Deck in the direction of arrow.
Fig. 1-5
1
2
2
DVD Deck
1
1-6: LCD PCB (Refer to Fig. 1-6)
1.
2.
3.
4.
5.
6.
7.
Remove the screw
1
.
Remove the MPEG Shield.
Disconnect the following connectors:
(CP102, CP103, CP104, CP801 and CP3805).
Remove the 4 screws
2
.
Remove the PCB Angle in the direction of arrow (A).
Remove the 4 screws
3
.
Remove the LCD PCB in the direction of arrow (B).
NOTE
Before your operation, please read “PREPARATION OF
SERVICING”.
Use the Lead Free solder.
Manual soldering conditions
• Soldering temperature: 320
±
20˚C
• Soldering time: Within 3 seconds
• Soldering combination: Sn-3.0Ag-0.5Cu
When Soldering/Removing of solder, use the drawing
equipment over the Pick Up Unit to keep the Flux smoke
away from it.
When installing the DVD Deck, remove all the soldering on
the short circuit position after the connection of Pick Up
PCB and DVD PCB connector.
1.
2.
3.
4.
5.
1
LCD PCB
1
1
1
1
1
1-7: LCD PCB (Refer to Fig. 1-7)
1.
2.
3.
Disconnect the following connectors:
(CP101, CP705, CP1001, CP2201 and CP3803).
Remove the 6 screws
1
.
Remove the LCD PCB in the direction of arrow.
Fig. 1-7
1-8: SIDE JACK PCB (Refer to Fig. 1-8)
1.
2.
Remove the 3 screws
1
.
Remove the Jack Plate, Jack Shield and Side Jack PCB in
the direction of arrow.
CP101
CP705
CP1001
CP2201
CP3803
Fig. 1-6
1
2
LCD PCB
MPEG Shield
2
2
2
PCB Angle
(A)
3
3
3
3
(B)
CP102
CP103
CP104
CP801
CP3805