20
Connections
2
3
1
TO USE AC POWER
1. Connect the AC cord to the AC adapter.
2. Connect the AC adapter plug into the TV/DVD’s DC input jack.
3. Connect the AC cord into a wall outlet.
Notes:
• Make sure to insert the plug of each cord securely.
• During use the AC adapter becomes warm. This is not a
malfunction.
WARNING:
• DO NOT CONNECT THIS UNIT TO THE POWER USING
ANY DEVICE OTHER THAN THE SUPPLIED AC ADAPTER
OR POWER CORD. THIS COULD CAUSE FIRE, ELECTRIC
SHOCK, OR DAMAGE.
• DO NOT USE WITH A VOLTAGE OTHER THAN THE
POWER VOLTAGE DISPLAYED. THIS COULD CAUSE
FIRE, ELECTRIC SHOCK, OR DAMAGE.
CAUTION:
• DO NOT USE THE AC ADAPTER IF IT IS COVERED BY A
CLOTH ETC., OR PRESSED INTO A NARROW AREA.
THIS RESULTS IN POOR DISSIPATION OF HEAT AND
MAY CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE.
• WHEN THIS UNIT IS NOT USED FOR A LONG TIME,
(E.G., AWAY ON A TRIP) IN THE INTEREST OF SAFETY,
BE SURE TO UNPLUG IT FROM THE WALL OUTLET.
• DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS
ARE WET. THIS MAY CAUSE ELECTRIC SHOCK.
• IF YOU NEED TO REPLACE THE SUPPLIED AC
ADAPTER OR AC CORD, THE SPECIFIED AC ADAPTER
AND AC CORD MUST BE USED. CONTACT THE DEALER
THAT YOU PURCHASED THE UNIT FROM.
Power connection
Power source
AC adapter
(supplied)
AC cord
(supplied)
AC 120V,
60Hz
To DC
input jack
21
Basic
setup
Notes:
• If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity,
etc., may affect the TV/DVD’s operation. In such case,
disconnect the AC cord once, then connect it again.
• The TV section has its own menu and also DVD section has
its own menu 43 .
/
/
/
ENTER
Press
or
to select the desired language:
English (ENGLISH), Spanish (ESPAÑOL) or
French (FRANCAIS), then press ENTER.
3
Press MENU, then press
or
to select
option.
2
Press MENU repeatedly until the menu screen
is cleared.
4
Setting the language
This TV/DVD can display the on screen language in English, Spanish or French
in the TV mode.
Select the language you prefer first, then proceed with the other menu
options.
Setting the language
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
/
/ ENTER/MENU
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
/MENU
Basic setup
POWER
1
To turn on the TV/DVD, press POWER.
The Power indicator on the front of the main unit
will light.
MENU
22
/
/
/
CH +/–
Press
or
to select “TV/CABLE”.
1
2
Press MENU in the TV mode, then press
or
to select
option.
Press MENU repeatedly until the menu screen is
cleared.
4
Press
or
to select “TV” or “CABLE”.
3
TV - VHF/UHF channels
CABLE - Cable TV channels
Cable TV chart
The chart below is typical of many cable system channel
allocations.
TV/CABLE selection
To memorize channels
This TV/DVD is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory, skipping over
unwanted channels. Before selecting channels, they must be programmed into
the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/
DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an
antenna, set the TV/CABLE selection to the TV position. When shipped from
the factory, this selection is in the CABLE position.
0–9
To ADD/DELETE channels
Press
or
to select the “AUTO CH MEMORY”,
then press
.
The TV will begin memorizing all the channels
available in your area.
Automatic memory tuning
Press
or
to select “ADD/DELETE”, then
press
.
1
Press
or
to select “ADD” or “DELETE”,
whichever function you want to perform.
3
2
Select the desired channel to be added or
deleted using Direct channel selection (0–9) or
CH +/–.
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/
/
/
/ MENU
CABLE
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/
/
/
/ MENU
CABLE
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/
/
/
/ MENU
TV
ADD
0-9
CH 001
/
/
/
/
/ MENU
TV/CABLE
CABLE
ADD/DELETE
/
/
/ MENU
AUTO CH MEMORY
TV/CABLE
CABLE
/
/
/ MENU
AUTO CH MEMORY
ADD/DELETE
Basic setup
MENU
23
TV
operation
TV operation
Adjust the volume level by pressing VOL + or –.
The volume level will be indicated on the
screen by green bars. As the volume level
increases, so do the number of bars. If the
volume decreases, the number of green bars
also decreases.
Set the TV/CABLE selection to the appropriate
position.
22
1
2
3
Press direct channel selection (0–9) to select
the channel.
TV mode direct channel selection
When the TV/CABLE selection is in the TV
position, all channels can be instantly selected by
using two buttons. (for example, to select channel
2, press “0”, then “2”.
If you press only “2”,
channel selection will
be delayed for a few
seconds.) For
channels 10 and
above, press the 2
digits in order.
4
Note:
If a channel with no broadcast is selected, the sound will
automatically be muted.
To turn on the TV/DVD, press POWER.
The Power indicator on the front of the main unit
will light.
POWER
VOL +/–
TV
- VHF/UHF channels
CABLE - Cable TV channels
CABLE mode direct channel selection
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9:
Press “0” twice, then 1-9 as needed.
Example, to select channel 2, press
“002”.
10-12:
Press “0”, then the remaining 2 digits.
Example, to select channel 12, press
“012”.
13-99:
Press the 2 digits in order. Example, to
select channel 36, press “36”.
100-125: Press the 3 digits in order. Example, to
select channel 120, press “120”.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding
channel will be selected in 2 seconds.
CATV
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
TV
VHF
2-13
UHF
14-69
TV operation
VOLUME
32
CH 02
TV operation
Auto power off
If a station being viewed stops broadcasting, the TV will
automatically shut itself off after 15 minutes.
0–9