Toshiba 1.5kV - 600A HCV-1KAU Vacuum Contactor Instruction Manual Download Page 3

Page: 3 / 30

TOSHIBA

INSTRUCTION MANUAL

For the Installation, Operation and Maintenance of

HCV-1JBU Vacuum Contactor, 1.5kV – 600A

HCV-1KAU Vacuum Contactor, 1.5kV – 720A

Never attempt to install, operate, maintain or dispose of this equipment until

you have first read and understood all of the relevant product warnings and

user directions that are contained in this Instruction Manual.

Please complete the following information for your records and retain with this manual:

Model: ___________________________________

Serial Number: _____________________________

Date of Installation: _________________________

Inspected by: ______________________________

Reference Number: _________________________

WARNING

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]

Summary of Contents for 1.5kV - 600A HCV-1KAU Vacuum Contactor































Search results

Summary of Contents for 1.5kV - 600A HCV-1KAU Vacuum Contactor

Reviews:

Related manuals for 1.5kV - 600A HCV-1KAU Vacuum Contactor

Brands by name

Popular brands

Toshiba 1.5kV - 600A HCV-1KAU Vacuum Contactor, Instruction Manual

Search results

Summary of Contents for 1.5kV - 600A HCV-1KAU Vacuum Contactor

Reviews:

Related manuals for 1.5kV - 600A HCV-1KAU Vacuum Contactor

Brands by name

Popular brands