GENERAL DESCRIPTION
Page 7
COMPONENTS
The Toshiba HCV-1JB and HCV-1KA vacuum
contactors described in this manual are suitable
for use on systems of 1.5kV, 600A and 1.5kV,
720A respectively.
Arc interruption is accomplished inside sealed
vacuum interrupters mounted on track-resistant
insulators. Vacuum interrupters use low-surge
contact materials, which exhibit low current
chopping levels reducing switching overvoltage.
Front view (Figure 1):
1. Insulation frame
2. Vacuum Interrupter
3. Primary terminal
4. Flexible conductor
Side view (
Figure 2
):
1. Drive unit
2. Auxiliary switch
3. Shaft
Rear view (Figure 3):
1. Closing coil
2. Opening spring
3. Terminal block
Figure 1 - Front of Contactor
Figure 2 - Right Side of Contactor
Figure 3 - Rear of Contactor
1
2
3
1
2
3
2
1
4
3
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]
