TOSHIBA TEC Corporation B-FP Series, Manual, Page: 47 / 124

-41-
Print condition:
Label length 290mm to 305mm
Sensor type None
Print count 1
(1) Maintenance counter values
Item Description Range
TOTAL FEED
Total label distance covered
(cannot be cleared)
0.0 to 320000.0 m
in units of 10 cm
TOTAL PRINT
Total label print distance covered
(cannot be cleared)
0.0 to 320000.0 m
in units of 10 cm
FEED
Current label distance covered 0.0 to 320000.0 m
in units of 10 cm
FEED(1 to 4)
Previous label distance covered
1 to 4
0.0 to 320000.0 m
in units of 10 cm
PRINT
Current label print distance 0.0 to 320000.0 m
in units of 10 cm
PRINT(1 to 4)
Previous label print distance
1 to 4
0.0 to 320000.0 m
in units of 10 cm
SYSTEM ERR
System error count 0 to 15
*About detail, refer to 7.8.3 Maintenance Counter Clear .
Maintenance Counter Count Conditions
Total label distance covered
Label distance covered Counts whenever the paper feed motor is driven, for
example, to feed, print, or exit a label. (Also counts
during a reverse feed operation.)
When the label distance covered reaches the maximum
value, the maintenance counter must be cleared.
Otherwise, the total label distance covered cannot be
updated.
Label print distance Counts while printing. (Counting is not performed
during a paper exit or reverse feed operation.)
System error count Counts when a No.18 system error described in the
section, “5.9 LCD MESSAGES AND LED
INDICATIONS”, occurs