TORXUN AUTOPED 10, Manual, Page: 23 / 43

Autoped/ M10 APPENDIX rev 0 (09221 DRAFT)
A-23
Device Unit type Default Description
EMY-IN CL-SPR Configuration of the emergency terminal (break contact switch)
CL-SPR Spring close (standard application)
STOP Stops Door/Gate panel closing/opening
OPEN Opens the Door/Gate panel
CL-MOT Motor close (inverse application)
OExSTp Off Off N/A
 Used to setone of the activation “values” to “sequential”
mode.

Sequential mode is used to hold the door open until a
second activation is received.

One activation opens the Door/Gate panel, and a
second activation is required to close the Door/Gate
panel.
OEI Opening devise
inside
OEO Opening devise
outside
KEY Key opening
devise
RADIO N/A
UNLOCK PERMAN IMPULS When the Door/Gate panel is first opened: momentarily unlocks the electric lock
PERMAN When the Door/Gate panel is first opened: Permanently unlocks the electric
lock.
EL-FB Off Off Electric lock status feedback
N.O. Open if unlocked (-); closed if locked (+)
N.C. Open if locked (+); closed if unlocked (-)
Lock AU UNLOCK UNLOCK/LOCK

Sets the condition of the lock when in automatic mode.

Only visible when Unlock is set to PERMAN.
LockEX LOCK UNLOCK/LOCK

Sets the condition of the lock when in EXIT mode.

Only visible when Unlock is set to PERMAN
LockMA UNLOCK UNLOCK/LOCK

Sets the condition of the lock when in MANUAL mode.

Only visible when Unlock is set to PERMAN
LcdDir 0 0-1 Orientation of the display (LCD direction)
MovCon OFF OFF/ON Endurance test Open/Close (moving continuous)
Pre Sen N.C. Off/N.C./N.O. Swing side presence sensor output logic
OExMAN ON OFF/ON

On enables activation to reopen the door during the closing cycle of a
manual opening.

OExMAN only if APuGo is turned OFF