TORXUN AUTOPED 10, Manual, Page: 20 / 43

Autoped/ M10 APPENDIX rev 0 (09221 DRAFT)
A-20
IV.6 CHART FOR OPTIONS IN THE PARAMETER MENU: SETTINGS FOR DOOR/GATE MOVEMENT
Device Unit type Default Value Description
Region Both Eu Eu or us EU- Europe; US- united states
Software version determined by UL standards. Must be changed to
US
Vo Low energy 9 0-9
Vc Low energy 9 0-9
TOEx Low energy 5s 3-60s ANSI 156.19 for low energy: TOEx must be no less than 5 seconds
TKey Low energy 5s 3-180s

TKey sets the hold open time resulting from an activation signal
from a device (referred to as KEY) on terminals 2+3

With TOEx and TKey, you can set a different hold open time for
different activation devices by using different terminals
TPuGo Low energy 3s 3-180s Determines how long the Door/Gate stays open
TDelay Low energy .2s 0.0-4.0s Tdelay sets the amount of time the door hesitates to allow the lock to
release before opening.
FDelay Low energy Off Off-7.0A
Fdelay is a temporary “hold closed” force applied to the door to keep it
closed while the electric lock is being released. This parameter sets
the amount of force that is applied. FDelay is only active if TDelay
setting is greater than 0.
TLock Low energy 0.5s 0.0-4.0s Sets amount of time Door/Gate panel will press against lock to engage
it.
Flock Low energy 2.0A Off-7.0A Sets amount of force that is applied to the Door/Gate panel to engage
the lock at the closed position. It is only active if TLock setting is
greater than 0.
FSlam Low energy Off Off-10 Accelerating function (Force Slam). For example: when a Door/Gate
panel needs to be forced shut due to a latch or heavy seals.