Torrot Motocross ONE, User Manual

Page: 48 / 58

User manual KIDS
42
Before initiating the start of the motorcycle, follow the next steps. Before doing so, ensure that the vehicle is
fully switched off:
- With the motorcycle switched off, check that the throttle returns automatically (see the section Throttle
and battery charge level indicator ).
- Inspect the battery to ensure it has no dents, cracks, damage or leaks.
- Check that the battery charging connector protector is properly fitted.
- Ensure there is no water in the battery connectors, in the battery compartment or in its connector.
- Check that the front and rear braking system is working properly (see the section Brakes ).
- Check that there is no element blocking the turning of the handlebar in both directions over its travel
(see the section
Forks and steering ).
- Check the state of the rims and the tires (see the section Rims and tires ).
- Inspect the vehicle’s transmission (see the section Transmission ).
- Clean the dust seals on the forks (see the section Forks and steering ).
To start the motorcycle, follow the steps below, always in the stated order:
1. Ensure the key switch (1) is in the off position (2), and
that the start button (4) located at the right of the
handlebar is also in the off position. Insert the battery
into the battery compartment and fasten it with the
Velcro® strap. See the section
Charge the battery outside
the vehicle .
2. Ensure that the man overboard device is connected to
the vehicle and properly fitted on the rider’s wrist.
3. Turn the key switch to the on position (3).
4. Put the start button on the throttle (4) to the on position.
The button is in the on position when it is pressed, and
in the off position when it is unpressed. You will hear a
“Click” when you actuate it.
5. The battery charge level indicator will then light up (5).