Torrot Motocross ONE, User Manual

Page: 44 / 58

User manual KIDS
38
It is important for the safety of the rider that the speed and power limiting device is set according to
him/her level of skill, experience and maturity.
You must also bear the requirements for safe use by an experienced rider in mind to adjust the speed and
power limiting device. For example:
- The maximum speed that can be reached with a certain setting may vary considerably on different surfaces;
the power requirements on soft ground will be greater than those required on hard ground.
- Reducing the performance unnecessarily may affect the ability to go up slopes or overcome obstacles,
making it unstable.
To deactivate/activate the speed and power limiting device on the motorcycle, follow the next steps, always
in the stated order:
1. The speed and power limiting device is at the front of the motorcycle. To access it, you must move away
the protective plastic (1) to one side by the lower zone.
2. Once you have moved the protective plastic, you can access to the speed and power limiting device (2).
This device has two positions:
- “50%” (3) in this position, the device limits the vehicle’s maximum
speed to less than 16 km/h, and it limits the vehicle’s power to half
of that set using the smartphone application (see the section Connect
using the Bluetooth APP ).
- “100%” (4): in this position, both the vehicle’s power and its
maximum speed depend on the parameters set in the smartphone
application (see the section
Connect using the Bluetooth APP) . Adjust
the settings according to the rider’s riding ability.
3. Once the speed and power limiting device has been adjusted to the desired
position, insert again the protective plastic in the chassis slot.
The vehicle is equipped with a safety device called man overboard, which switches off the vehicle when it is
disconnected.
The function of this device is to switch off the motorcycle in the event of falling off, thus preventing injury to
the rider. Therefore, the device’s strap must be securely attached to the rider’s wrist, ensur ing that it cannot
be unintentionally removed from the rider’s wrist and it does not squeeze the rider’s wrist excessively.
Before using the vehicle, ensure the rider has the man overboard fitted properly.