Torrot Motocross ONE, User Manual

Page: 15 / 58

9
- Put oil on the unpainted metal surfaces to prevent rust, prevent it from falling on the brakes and on
rubber parts.
- Raise the motorcycle such that the two wheels do not touch the ground (if this is not possible, put
cardboard under the wheels).
- Cover the motorcycle to protect it from dust and dirt.
- Inspect periodically the vehicle to ensure all its components are working properly and then re-cover
it.
Inspect periodically the battery charge level. The charge level must be 40-60%. To check this charge
value, connect the battery to the motorcycle and, upon switching it on, check that the battery charge
level indicator shows 2 or 3 charge lines. If it is under that level, connect the charger until it reaches
the stated level. If it is above that level, use the motorcycle until it reaches the stated level.
- If the battery will be stored for a long time, one to three complete discharge-charge cycles should be
carried out every 3 months to preserve the battery’s p erformance. After such cycle(s), if you want to
store it, it must be kept in the storage conditions.
The conditions of the place where the vehicle is stored must be as follows:
- A dry, clean, well-ventilated place free of corrosive gas.
- The temperature must remain between 15 and 25ºC.
- The humidity must be between 45 and 75%.
- It must not be exposed to direct sunlight.
To operate the vehicle after storage:
- Perform a general lubrication.
- Inspect the tire pressure and, if necessary, inflate them to the pressure indicated in this manual.
- Charge the battery to 100% and then connect it to the motorcycle.