Torrot Motocross ONE, User Manual

Page: 38 / 58

User manual KIDS
32
If any element of the braking system suffers a blow, it must be replaced.
The replacement of the braking system elements is a delicate operation that may involve safety
problems in the vehicle’s braking system. To do this, please contact your nearest official TORROT
dealer.
If the brake lever is too close or too far to the rider, you can adjust it by turning the rear brake lever regulator
in one direction (3 and 4) to bring the lever closer to or move it further from the handlebar.
Periodically inspect the brake pads. If less than 2mm of usable pad remains, they must be replaced.
The brake discs must be cleaned periodically with products designed specifically for that purpose. Never use
products such as soap, grease remover or other chemical products that are not specifically for that purpose.
If you detect that the brake lever has too much travel, the hydraulic brake circuit fluid must be bled and/or
changed. This fluid must be replaced with a DOT 3 or DOT 4 from a sealed container. Under any circumstances
replace it with another hydraulic fluid.
Periodically inspect the elements of the vehicle’s braking systems. If the brake discs, calipers, hoses,
pistons, levers and/or brackets show any damage or signs of deterioration, they must be replaced.
This maintenance is a delicate operation that may involve safety problems on
the vehicle’s braking
system. To do this, please contact your nearest official TORROT dealer.
The KIDS motorcycles ’ hydraulic forks are composed by the outer and the inner tubes. They are specifically
designed for each model. Thanks to this , a different geometry is achieved for each format, hence the rider’s
sensations are unique.
During continuous use, the forks may become hot. Do not touch the forks during or just after using
the vehicle under any circumstances.