7
1. Connect cable from mast to base, listening for a “click” to ensure a good connection.
2. Align holes in curved mast plate with holes in base, feeding any extra cable into base fork to
keep it from being pinched or mashed. Insert one (1) washer onto each bolt; insert bolts with
washers through holes in mast plate and into base. Use 10mm hex wrench to tighten.
3. Thread the right pedal axle (marked “R”) clockwise into the pedal crank on user’s right side
of unit; tighten with 15mm wrench.
4.
The left pedal has a reverse (left-hand) thread.
Thread the left pedal axle (marked “L”)
counter-clockwise into the pedal crank on user’s left side of unit; tighten with 15mm wrench.
5. Mast & Pedals
2
1
3
4
