6
4. Console, Bottle Tray & Mast
1. Align holes in bottle tray with holes in mast. Place one (1) washer on each hex bolt, then
insert bolt with washer through tray into mast. Use 5mm hex wrench to tighten.
2. Connect cable from mast to cable in console (not shown), listening for a “click” to ensure a
good connection.
3. Place console face down on soft surface. Align mast bracket to back of console. Insert four
(4) Phillips screws through holes in mast bracket into holes in back of console; use #2 Phillips
screwdriver to tighten.
4. Insert battery, orienting battery nodes according to diagram in console (not shown).
2
3
4
1
