47
Operating Manual Ultralight 402
Deutsch
English
8. Starting up
2. If you want to connect the motor to
both the kayak’s rudder and steering system
: Fix
the two karabiner hooks supplied to the short line. Now connect the kayak’s rudder
with the triangular clamp ring at the upper end of the motor shaft using the short
lines. To do so insert the karabiner hooks into the
holes in the clamp ring and tie the other end of
the line to the kayak’s rudder. Movements of the
rudder to the left or right should produce the
corresponding steering movements of the motor.
For good steering it is not essential for the
steering movements to be identical.
8.4 Connecting the remote throttle control with the integrated display and
magnetic key
1. Connect the remote throttle with the connection cable.
2. Position the remote throttle in the desired position and fix it, e.g. with a RAM mount
holder (M4 thread in the base of the remote throttle control) or a commercial Velcro
strip (neither within the scope of supply).
8.5 Connecting the battery pack
1. Insert the battery pack in the desired position in the kayak and fix it if necessary with
straps (not within the scope of supply). When doing so ensure that the top of the
battery (aerial icon) is showing upwards in order to provide the GPS function. Do not
cover the battery pack with metallic objects or those containing metal (e.g. rescue
blankets etc.).
2. Connect the cable from the motor to the battery pack. Ensure that there is a water-
proof bayonet closure that is placed in a particular position and screwed into place.
3. Connect the cable from the remote throttle to the battery pack. Ensure that the
connection is waterproof and screwed into place. It can only be fixed in one position.