Torqeedo Cruise 2.0 S, Operating Manual, Page: 20 / 32

20
Operating manual Cruise 2.0
The cable set comes complete with a CF8 15 A fuse. In case of a short circuit, the fuse
cuts the circuit and prevents any further damage.
You can extend the capacity using a parallel configuration of up to four Torqeedo Power
Batteries from the „User Installation (UI)“ series in the same way as described under 8.
(Connecting the Cruise 2.0 to lead batteries). Please follow the Operating instructions for
the lithium-manganese batteries.
8.6 Connecting the Torqeedo remote accelerator lever to the Cruise 2.0
Optionally, you can control the power of the Cruise 2 using a remote accelerator lever
available as an accessory (instead of the tiller handle).
If you use a remote accelerator lever to control the power, the voltage display integrated
in the tiller is no longer active.
The remote accelerator lever is connected to the motor in two stages:
1. Disconnect the steering cable plug from the tiller.
2. Insert the steering cable plug into the remote accelerator cable socket.
If you use several Cruise motors on one boat, you should have the remote accelerator
levers synchronized by an authorized Torqeedo Service Center. This ensures that the
motors provide equal thrust at the same accelerator lever position. This is especially
important when the motors are not mounted immediately next to each other (e.g. on
catamarans).
9. Operation
9.1 Transom bracket
The power needed for steering can be adjusted with the friction screw. Turning the screw
clockwise increases the necessary steering power up to locking the motor. Turning anti-
clockwise reduces the necessary steering force.