Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
Note:
Engaging the blade-control switch (PTO) with
the throttle position at half or less causes excessive
wear to the drive belts.
g008945
Figure 17
Disengaging the Blade-Control
Switch (PTO)
g009174
Figure 18
Operating the Throttle
You can move the throttle control between the F
AST
and S
LOW
positions (
Always use the F
AST
position when turning on the
mower deck with the blade-control switch (PTO).
g008946
Figure 19
Operating the Choke
Use the choke to start a cold engine.
1.
If the engine is cold, use the choke to start the
engine.
2.
Pull up on the choke knob to engage the choke
before using the ignition switch (
).
3.
Push down on the choke to disengage the choke
after the engine has started (
).
g008959
Figure 20
1.
On position
2.
Off position
22
Summary of Contents for Z Master 74902TE
Page 75: ...Schematics g009180 Wire Diagram Rev A 75...
Page 76: ...Notes...
Page 77: ...Notes...
Page 78: ...Notes...