decal126-2055
126-2055
1.
Wheel-lug nut torque 129 N∙m (95 ft-lb) (4x)
2.
Wheel-hub nut torque 319 N∙m (235 ft-lb)
3.
Read and understand the
Operator’s manual
before
performing any maintenance, check torque after first 100
hours then every 500 hours thereafter.
decal127-0326
127-0326
1.
Read the
Operator's
Manual
.
3.
Remove the key from
the ignition and read the
Operator's Manual
before
performing maintenance
or servicing the machine.
2.
Height of cut
decal131-4036
131-4036
1.
Maximum drawbar pull 36
kg (80 lb)
2.
Read the
Operator's
Manual
.
decal136-5508
136-5508
1.
Belt routing
decal114-4468
114-4468
1.
Warning—read the
Operator's Manual.
5.
Loss of traction/control hazard, slopes—loss of traction/control
on a slope, disengage the blade-control switch (PTO),
proceed off the slope slowly.
2.
Warning—do not operate this machine unless you are trained.
6.
Crushing/dismemberment hazard of bystanders—do not carry
passengers, look forward and down when operating the
machine, look behind and down when reversing.
3.
Warning—engage the parking brake, shut off the engine, and
remove the ignition key; read the instructions before servicing
or performing maintenance.
7.
Cutting/dismemberment hazard; hand or foot—stay away
from moving parts and keep all guards and shields in place.
4.
Thrown object hazard—Shut off the engine and pick up
debris before operating the machine, keep bystanders a safe
distance away from the machine, keep deflector in place
10
Summary of Contents for Z Master 74902TE
Page 75: ...Schematics g009180 Wire Diagram Rev A 75...
Page 76: ...Notes...
Page 77: ...Notes...
Page 78: ...Notes...
