Toro Z Master 74902TE, Operator'S Manual

Page: 50 / 80

g000960
Figure 65
1. Positive battery post 3. Red (+) charger lead
2. Negative battery post 4. Black (-) charger lead
Servicing the Fuses
The electrical system is protected by fuses. It requires
no maintenance, however, if a fuse blows check the
component/circuit for a malfunction or short.
1. The fuses are located on the console to the right
of the seat (
Figure 66 ).
2. To replace the fuses, pull out on the fuse to
remove it.
3. Install a new fuse ( Figure 66 ).
g008966
Figure 66
1. Optional accessory (15 A) 4. Main (25 A)
2. Charge (25 A) 5. Console
3. PTO (10 A)
Drive System
Maintenance
Checking the Seat Belt
Service Interval: Before each use or daily
Visually inspect seat belt for wear, cuts, and proper
operation of retractor and buckle. Replace before
operating if damaged.
Checking the Rollover
Protection System (ROPS)
Knobs
Service Interval: Before each use or daily
WARNING
To avoid injury or death from rollover: keep
the roll bar in the fully raised locked position
and use the seat belt.
Ensure that the seat is secured to the
machine.
Check that both the mounting hardware and the knobs
are in good working condition. Make sure that the
knobs are fully engaged with the roll bar in the raised
position. The upper hoop of the roll bar may need
to be pushed forward or pulled rearward to get both
knobs fully engaged (
Figure 67 ).
50