Toro Z Master 74902TE, Operator'S Manual

Page: 13 / 80

Product Overview
g027964
Figure 4
1. Height-of-cut deck-lift
pedal 7. Seat belt
2. Transport lock 8. Fuel cap
3. Parking-brake lever 9. Mower deck
4. Controls 10. Caster wheel
5. Motion-control levers 11. Z Stand
6. Roll bar
Controls
Become familiar with all the controls before you start
the engine and operate the machine (
Figure 4 and
Figure 5 ).
g008951
Figure 5
1. PTO switch 4. Hour
meter/safety-interlock
display
2. Choke control 5. Ignition switch
3. Throttle control 6. Fuses
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (
Figure 5 ).
Fuel Gauge
The fuel gauge is located with the hour meter, and
the bars light up when the ignition switch is in the O
N
position ( Figure 5 ).
The indicator light appears when the fuel level is low
(approximately 1 gallon remaining in the fuel tank).
Safety-Interlock Indicators
There are symbols on the hour meter that indicate
with a black triangle that the interlock component is
positioned correctly (
Figure 6 ).
Battery-Indicator Light
If you turn the ignition key to the O
N
position for a
few seconds, the battery voltage displays in the area
where the hours are normally displayed.
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (
Figure 6 ).
g008950
Figure 6
1. Fuel gauge (bars) 4. Safety-interlock symbols
2. Battery light 5. Low fuel-indicator light
3. Hour meter
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
LOW
to F
AST
position ( Figure 5 ).
13