Toro TXL 2000, Operator'S Manual

Page: 32 / 60

Removing the Front Cover
1. Raise the loader arms and secure them with the
cylinder locks.
2. Loosen the 2 bolts securing the front cover to
the machine (
Figure 43 ).
g260062
Figure 43
1. Front cover
2. Bolt (2)
3. Slide the cover off the machine.
4. When installing the cover, torque the bolts to 41
N∙m (30 ft-lb).
Removing the Front Cover
Assembly
1. Raise the loader arms and secure them with the
cylinder locks.
2. Remove the 4 bolts securing the cover assembly
to the machine (
Figure 44 ).
g303492
Figure 44
1. Bolt (4)
2. Front cover assembly.
3. Remove the cover assembly ( Figure 44 ).
Lubrication
Lubricating the Machine
Service Interval: Before each use or daily (Grease
immediately after every washing.)
Grease Type: General-purpose grease.
1. Park the machine on a level surface, engage the
parking brake, and lower the loader arms.
2. Shut off the engine and remove the key.
3. Clean the grease fittings with a rag.
4. Connect a grease gun to each fitting ( Figure 45 ,
Figure 46 , and Figure 47 ).
Note:
Raise the loader arms before greasing
the fittings in Figure 47 .
g261040
Figure 45
g261039
Figure 46
32