6.
Repeat step
and
for the other side of the
machine.
7.
Slowly
lower the loader arms until the cylinder
locks contact the cylinder bodies and rod ends.
Removing and Storing the
Cylinder Locks
Important:
Remove the cylinder locks from the
rods and fully secure them in the storage position
before operating the machine.
1.
Start the engine.
2.
Raise the loader arms to the fully raised position.
3.
Shut off the engine and remove the key.
4.
Remove the pins securing the cylinder locks.
5.
Place the cylinder locks on the posts on the
sides of the machine and secure with the pins.
6.
Lower the loader arms.
Accessing Internal
Components
WARNING
Opening or removing covers, hoods, and
screens while the engine is running could
allow you to contact moving parts, seriously
injuring you.
Before opening any of the covers, hoods, and
screens, shut off the engine, remove the key
from the key switch, and allow the engine to
cool.
Opening the Hood
1.
Raise the loader arms and install the cylinder
lock.
2.
Shut off the engine and remove the key.
3.
Loosen the hood-locking screw (
).
g260060
Figure 38
1.
Hood-locking screw
3.
Hood
2.
Hood-latch lever
4.
Hold the hood down and release the 2 latches
(
).
5.
Lift open the hood (
).
30
