Toro TXL 2000 Operator'S Manual Download Page 18 | Manualshive

Page: 18 / 60

background image

Specifications

Note:

Specifications and design are subject to

change without notice.

Model 22530

Width

137 cm (54 inches)

Length

251 cm (99 inches)

Height

173 cm (68 inches)

Weight

3034 kg (6,690 lb)

Operating capacity (35% of tipping
capacity

1

)

907 kg (2,000 lb)

•

Arms retracted

•

Arms extended

417 kg (920 lb)

Tipping capacity

1

2592 kg (5,715 lb)

•

Arms retracted

•

Arms extended

1188 kg (2,620 lb)

Wheelbase

137 cm (54 inches)

Dump height (with standard bucket)

163 cm (64 inches)

•

Arms retracted

•

Arms extended

226 cm (89 inches)

Reach—fully raised (with standard
bucket)

66 cm (26 inches)

•

Arms retracted

•

Arms extended

115 cm (45 inches)

Height to hinge pin (with standard
bucket in highest position)

251 cm (99 inches)

•

Arms retracted

•

Arms extended

312 cm (123 inches)

1. The operating capacity is calculated as 35% of the tipping capacity with

a standard bucket and 75 kg (165 lb) operator, per ISO 14397-1. Other

attachments will have different operating capacities; refer to the Operator’s

Manual or load capacity decal for the attachment.

Model 22531

Width

137 cm (54 inches)

Length

251 cm (99 inches)

Height

173 cm (68 inches)

Weight

2828 kg (6,235 lb)

Operating capacity (35% of tipping
capacity

1

)

907 kg (2,000 lb)

Tipping capacity

1

2592 kg (5,715 lb)

Wheelbase

137 cm (54 inches)

Dump height (with standard bucket)

163 cm (64 inches)

Reach—fully raised (with standard
bucket)

66 cm (26 inches)

Height to hinge pin (with standard
bucket in highest position)

251 cm (99 inches)

1. The operating capacity is calculated as 35% of the tipping capacity with

a standard bucket and 75 kg (165 lb) operator, per ISO 14397-1. Other

attachments will have different operating capacities; refer to the Operator’s

Manual or load capacity decal for the attachment.

Attachments/Accessories

A selection of Toro-manufactured attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
Toro-manufactured attachments and accessories.

To ensure optimum performance, use genuine Toro
replacement parts and accessories. Toro accepts
no liability for machine damage or personal injury
that results from the use of other manufacturer
attachments. The user accepts the burden of these
risks.

18

«
...
16
17
18
19
20
...
»

Summary of Contents for TXL 2000





























































Reviews:

No comments

Related manuals for TXL 2000

Brand: jcb Pages: 31

Brand: jcb Pages: 18

Brand: New Holland Pages: 41

Brand: mecalac Pages: 114

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands