Toro TITAN ZX6020, Operator'S Manual, Page: 6 / 60

•
Never interfere with the intended function of a safety
device or reduce the protection provided by a safety
device. Check their proper operation regularly.
•
Keep machine free of grass, leaves, or other debris build
up. Clean up oil or fuel spillage and remove any fuel
soaked debris. Allow machine to cool before storing.
•
If you strike a foreign object, stop and inspect the
machine. Repair, if necessary, before restarting.
•
Never make any adjustments or repairs with the engine
running.
•
Check grass catcher components and the discharge guard
frequently and replace with manufacturer’s recommended
parts, when necessary.
•
Mower blades are sharp. Wrap the blade or wear gloves,
and use extra caution when servicing them.
• Check for proper brake operation frequently. Adjust and
service as required.
•
Maintain or replace safety and instruction labels as
necessary.
•
Use only genuine Toro replacement parts to ensure that
original standards are maintained.
Toro Riding Mower Safety
The following list contains safety information specific to Toro
products or other safety information that you must know that
may not be included in the ANSI standards.
•
Stop the engine, move the motion control levers to neutral
and outward to the park position, disengage the blade
control switch, remove key before and disconnect spark
plug wire(s) performing any service, repairs, maintenance
or adjustments.
•
Keep hands, feet, hair, and loose clothing away from
attachment discharge area, underside of mower and any
moving parts while engine is running.
•
Do not touch equipment or attachment parts which may
be hot from operation. Allow to cool before attempting
to maintain, adjust or service.
•
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Protect your face,
eyes, and clothing when working with a battery.
•
Battery gases can explode. Keep cigarettes, sparks and
flames away from battery.
•
Use only Toro approved attachments. Warranty may be
voided if used with unapproved attachments.
•
If loading the machine onto a trailer or truck, use a single,
full-width ramp only. The ramp angle should not exceed
15 degrees.
6