Problem
Possible Cause
Corrective Action
1. By pass valves is not closed tight.
1. Tighten the by pass valves.
2. Pump belt is worn, loose or broken.
2. Change the belt.
3. Pump belt is off a pulley.
3. Change the belt.
4. Broken or missing idler spring.
4. Replace the spring.
The machine does not drive.
5. Hydraulic oil level is low or too hot.
5. Add hydraulic oil to reservoirs or let it
cool down.
1. Cutting blade(s) is/are bent or
unbalanced.
1. Install new cutting blade(s).
2. Blade mounting bolt is loose.
2. Tighten the blade mounting bolt.
3. Engine mounting bolts are loose.
3. Tighten the engine mounting bolts.
4. Loose engine pulley, idler pulley, or
blade pulley.
4. Tighten the appropriate pulley.
5. Engine pulley is damaged.
5. Contact an Authorized Service Dealer.
6. Blade spindle is bent.
6. Contact an Authorized Service Dealer.
The machines vibrates abnormally.
7. Motor mount is loose or worn.
7. Contact an Authorized Service Dealer.
1. Blade(s) not sharp.
1. Sharpen the blade(s).
2. Cutting blade(s) is/are bent.
2. Install new cutting blade(s).
3. Mower deck is not level.
3. Level mower deck from side-to-side
and front-to-rear.
4. Underside of mower is dirty.
4. Clean the underside of the mower.
5. Tire pressure is not correct.
5. Adjust the tire pressure.
The machine cuts grass at an uneven
cutting height.
6. Blade spindle bent.
6. Contact an Authorized Service Dealer.
1. Mower deck belt is worn, loose or
broken.
1. Install new deck belt.
2. Mower deck belt is off pulley.
2. Install mower deck pulley and check
the idler pulley, idler arm and spring for
correct position and function.
3. Pump drive belt is worn, loose or
broken.
3. Check the belt tension or install new
belt.
The blades do not rotate.
4. Broken or missing idler spring.
4. Replace the spring.
55
Summary of Contents for TITAN ZX6020
Page 56: ...Schematics G014723 Wire Diagram Rev B 56...
Page 57: ...Notes 57...
Page 58: ...Notes 58...
Page 59: ...Notes 59...