2
Installing the Discharge Chute
Parts needed for this procedure:
1
Bolt (1/4–20 X 1.50 inch)
1
Washer-faced lock nut (1/4–20 inch)
Procedure
Insert the chute post through the bracket into the base of the
machine and secure it using a bolt and a lock nut (
Figure 4
).
Figure 4
1.
Chute post
3.
Washer-faced lock nut
(1/4–20 inch)
2.
Bolt (1/4–20 X 1.50 inch)
4.
Bracket
3
Filling the Engine with Oil
No Parts Required
Procedure
Your machine comes with oil in the engine.
Model
Max fill
36001
17 oz (0.5 L)
Oil type: automotive detergent oil with an API service
classification of SJ, SL, or higher.
Use
Figure 5
below to select the best oil viscosity for the
outdoor temperature range expected:
Figure 5
1.
Move the machine to a level surface.
2.
Clean around the oil fill cap.
3.
Check the oil level and add oil if necessary.
Note:
Do not tighten the dipstick when checking the
oil level.
5
