Product Overview
Figure 21
1.
Engine hood
5.
Seat
2.
Operator’s seat
6.
Front cutting units
3.
Control arm
7.
Rear cutting units
4.
Steering wheel
Controls
Seat Adjusting Knobs
The seat adjusting lever (Figure 22) allows you to adjust
the seat fore and aft. The weight adjusting knob adjusts
the seat for the operator’s weight. The weight gauge
indicates when the seat is adjusted to the weight of the
operator. The height adjusting knob adjusts the seat for
the operator’s height.
Figure 22
1.
Weight gauge
3.
Height adjusting knob
2.
Weight adjusting knob
4.
Adjusting lever (fore and
aft)
Traction Pedal
The traction pedal (Figure 23) controls the forward and
reverse operation. Press the top of the pedal to move
forward and the bottom to move rearward. Ground
speed depends on how far you press the pedal. For no
load, maximum ground speed, fully press the pedal while
the throttle is in the Fast position.
To stop, reduce foot pressure on the traction pedal and
allow it to return to the center position.
Figure 23
1.
Traction pedal
4.
Brake pedal
2.
Mow speed limiter
5.
Parking brake
3.
Spacers
6.
Tilt steering pedal
Mow Speed Limiter
When the mow speed limiter (Figure 23) is flipped up it
will control the mow speed and allow the cutting units
to be engaged. Each spacer adjusts the mowing speed
by ½ mile per hour. The more spacers you have, on the
top of the bolt the slower you will go. For transport, flip
back the mow speed limiter and you will have maximum
transport speed.
Brake Pedal
Press the brake pedal (Figure 23) to stop the machine.
Parking Brake
To engage the parking brake, (Figure 23) push down on
the brake pedal and press the top forward to latch. To
release the parking brake, press the brake pedal until the
parking brake latch retracts.
Tilt Steering Pedal
To tilt the steering wheel towards you, press the foot
pedal (Figure 23) down, and pull the steering tower
toward you to the most comfortable position and then
release the pedal.
23
