Toro Pro Sweep 07068, Operator'S Manual

Page: 17 / 40

11
Assembling the Handheld
Remote
Parts needed for this procedure:
1 Handheld remote
4 Battery (AAA)
6
Small screws
Procedure
1. Remove the rubber bands securing the remote
halves together, and remove the back cover.
2. Plug each battery into a terminal cradle,
observing proper polarity (
Figure 17 ).
Note:
If you install the batteries improperly, the
machine will not be damaged, but it will fail to
operate. The cradle is embossed with polarity
markings for each terminal.
g029817
Figure 17
1. Screw 4. Steel gasket
2. Cover 5. Batteries
3. Seal 6. Handheld remote
3. Ensure that the steel gasket and rubber seal are
seated in the channel in the remote and set the
back cover in place (
Figure 17 ).
4. Secure the cover with 6 screws ( Figure 17 ) and
torque them to 1.5 to 1.7 N∙m (13 to 15 in-lb).
Note:
Do not overtighten the screws.
17