Toro Groundsmaster 4100-D 30411, Operator'S Manual

Page: 5 / 64

restarting and operating the equipment. Torque
all the spindle pulley nuts to 130 to 150 ft-lb (176
to 203 N
⋅
m);
– if the machine starts to vibrate abnormally (check
immediately).
• Disengage drive to attachments when transporting
or not is use.
• Stop the engine and disengage drive to attachment:
– before refuelling;
– before making height adjustment unless
adjustment can be made from the operator’s
position.
• Reduce the throttle setting before stopping engine
and, if the engine is provided with a fuel shut-off
valve, turn the fuel off at the conclusion of mowing.
• Never raise deck with the blades running.
• Keep hands and feet away from the cutting units.
• Look behind and down before backing up to be sure
of a clear path.
• Slow down and use caution when making turns and
crossing roads and sidewalks.
• Slow down and use caution when making turns and
crossing roads and sidewalks.
• Do not operate the mower under the influence of
alcohol or drugs.
• Use care when loading or unloading the machine
into a trailer or truck.
• Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
• The operator shall turn on flashing warning lights,
if provided, whenever traveling on a public road,
except where such use is prohibited by law.
Maintenance and Storage
• Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
• Never store the equipment with fuel in the tank
inside a building where fumes may reach an open
flame or spark.
• Allow the engine to cool before storing in any
enclosure and do not store near flame.
• To reduce the fire hazard, keep the engine,
silencer/muffler, battery compartment, cutting units,
drives, and fuel storage area free of grass, leaves, or
excessive grease. Clean up oil or fuel spillage.
• Replace worn or damaged parts for safety.
• If the fuel tank has to be drained, do this outdoors.
• On multi-bladed machines, take care as rotating one
blade can cause other blades to rotate.
• When machine is to be parked, stored, or left
unattended, lower the cutting units unless a positive
mechanical lock is provided.
• Disengage drives, lower the cutting units, move
traction pedal to Neutral, set parking brake, stop
engine and remove key and disconnect spark plug
wire. Wait for all movement to stop before adjusting,
cleaning or repairing.
• Shut off fuel while storing or transporting. Do not
store fuel near flames.
• Park machine on level ground. Never allow untrained
personnel to service machine.
• Use jack stands to support components when
required.
• Carefully release pressure from components with
stored energy.
• Disconnect battery before making any repairs.
Disconnect the negative terminal first and the
positive last. Reconnect positive first and negative
last.
• Use care when checking blades. Wrap the blades or
wear gloves, and use caution when servicing them.
Only replace blades. Never straighten or weld them.
• Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
• Charge batteries in an open well ventilated area,
away from spark and flames. Unplug charger before
connecting or disconnecting from battery. Wear
protective clothing and use insulated tools.
Toro Mower Safety
The following list contains safety information specific
to Toro products or other safety information that you
must know that is not included in the CEN, ISO, or
ANSI standards.
This product is capable of amputating hands and
feet and throwing objects. Always follow all safety
instructions to avoid serious injury or death.
Use of this product for purposes other than its intended
use could prove dangerous to user and bystanders.
Engine exhaust contains carbon monoxide,
which is an odorless, deadly poison that can
kill you.
Do not run engine indoors or in an enclosed
area.
5