Attachment Lift Switch
The attachment lift switch raises the attachment to the
highest position (i.e., the T
RANSPORT
position) and
lowers the attachment to the lowest position (i.e., the
O
PERATING
) position.
•
Raise the attachment:
Press the rear of the
switch.
•
Lower the attachment:
Press the front of the
switch.
Raise the attachment to the T
RANSPORT
position
whenever you transport the machine between
locations. Lower the attachment to the O
PERATING
position whenever you are not using the machine.
PTO Switch
•
Engage the PTO:
Pull up on the switch.
•
Disengage the PTO:
Push the switch down.
The only time you should engage the PTO is when the
PTO attachment is in the O
PERATING
position (lowered
to the ground with the driveshaft connected) and you
are ready to begin operation.
Note:
If you leave the operator’s seat while the
PTO switch is in the O
N
position, the machine will
automatically shut off the engine; refer to
the PTO Function (page 34)
.
Key Switch
The key switch has 3 positions: O
FF
, O
N
/P
REHEAT
,
and S
TART
.
Use the switch to start or shut off the engine [refer
to
Starting the Engine (page 34)
or
] or to review the display-screen
information [refer to
Understanding the Display-Screen
Information (page 27)
].
Throttle-Control Switch
Use the switch to adjust the engine speed.
•
Increase the engine speed:
Press and release
the front part of the switch to increase the speed
by 100 rpm. Press and hold to increase the speed
to the maximum amount.
•
Decrease the engine speed:
Press the rear
part of the switch to decrease the speed by 100
rpm. Press and hold to decrease the speed to the
minimum amount (idle).
Display Screen
The display screen shows information about your
machine, such as the operating status, various
diagnostics, and other information.
Refer to
Understanding the Display-Screen
Information (page 27)
for more display-screen
information.
Display Screen Button
Refer to
Using the Display-Screen Button (page 27)
.
Cab Controls
Machines Equipped with a Cab
g300626
Figure 22
1.
Windshield-wiper switch
4.
Temperature-control knob
2.
Fan-control knob
5.
Air-conditioning switch
3.
Light switch
Windshield-Wiper Switch
Use the switch (
) to turn the windshield
wipers on or off.
Fan-Control Knob
Rotate the fan-control knob (
) to regulate
the speed of the fan.
Light Switch
Press the switch (
) to turn the dome light
on or off.
Temperature-Control Knob
Rotate the temperature-control knob (
) to
regulate the air temperature in the cab.
Air-Conditioning Switch
Use this switch (
) to turn the air conditioning
on or off. Use the fan-control knob to control the
air-conditioning.
Note:
The engine rpm rises when you turn on the
air-conditioning.
21
